IR Proximity Sensor

SKU
RC_R1625
In stock
Rs 59.00 Rs 50.00
  • 1. When the module detects an obstacle in front of the signal , the green indicator light on the board level , while low-level continuous output signal OUT port , the module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential is adjusted clockwise adjustment potentiometer to detect the distance increases ; counterclockwise to adjust the potentiometer to reduce the detection distance .
  • 2 .active infrared sensors to detect the reflected , and thus the shape of the reflectivity of the target detection range is critical . The minimum detection distance which black , white maximum ; small objects from a small area , a large area from the Grand .
  • 3 . the output port OUT sensor module can be directly connected to the microcontroller IO port , you can directly drive a 5V relay ; Connection : VCC-VCC; GND-GND; OUT-IO
  • 4 .using the comparator LM393, stable ;
  • 5 .can be used for 3-5V DC power supply modules . When the power is turned on, the red power


indicator light ;

  • 6. with the screw holes of 3mm , easy fixed installation ;
  • 7. board size : 3.1CM * 1.5CM
  • 8. each module shipments comparing the threshold voltage has been adjusted by the potentiometer is good , not exceptional circumstances, do not arbitrarily adjust the potentiometer.
  • 1. When the module detects an obstacle in front of the signal , the green indicator light on the board level , while low-level continuous output signal OUT port , the module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential is adjusted clockwise adjustment potentiometer to detect the distance increases ; counterclockwise to adjust the potentiometer to reduce the detection distance .
  • 2 .active infrared sensors to detect the reflected , and thus the shape of the reflectivity of the target detection range is critical . The minimum detection distance which black , white maximum ; small objects from a small area , a large area from the Grand .
  • 3 . the output port OUT sensor module can be directly connected to the microcontroller IO port , you can directly drive a 5V relay ; Connection : VCC-VCC; GND-GND; OUT-IO
  • 4 .using the comparator LM393, stable ;
  • 5 .can be used for 3-5V DC power supply modules . When the power is turned on, the red power


indicator light ;

  • 6. with the screw holes of 3mm , easy fixed installation ;
  • 7. board size : 3.1CM * 1.5CM
  • 8. each module shipments comparing the threshold voltage has been adjusted by the potentiometer is good , not exceptional circumstances, do not arbitrarily adjust the potentiometer.
More Information
BestsellerNo
Is FeaturedNo
rpiNo
HOT DEALSNo
Write Your Own Review
You're reviewing:IR Proximity Sensor
Your Rating
We found other products you might like!

Shipping

All Over India

Accept payments online

Genuine Products

Safe Transactions

Same Day Shipping

0 / 5
Contact Us