Our prices are exclusive of taxes and shipping. 18% GST shall be added during check out. Happy Shopping! :)  

Robocraze Welcome to Robocraze

XBee 2mW - Series 2

Hover on above image to view it large

More Views

XBee 2mW - Series 2

Be the first to review this product

Rs. 1,116.00

Availability: Out of stock

XBee modules are embedded solutions providing wireless end-point connectivity to devices. These modules use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throughput applications requiring low latency and predictable communication timing.“ So basically XBee is Digi’s own Zigbee based protocol.


Cool and easy to work with!!


This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you update the firmware through X-CTU.

Note: Series 1 and Series 2 XBee modules have the same pin-out. However, Series 1 modules cannot communicate with Series 2 modules

Specifications

  • TX Peak Current: 40 mA
  • RX Current: 40 mA (@3.3 V)
  • Power-down Current: < 1 μA
  • Indoor/Urban: up to 133 ft (40 m)
  • Outdoor line-of-sight: up to 400 ft (120 m)
  • Transmit Power: 2 mW (3 dBm)
  • Receiver Sensitivity: -96 dBm
  • Dimensions: 24mm x 28mm x 9mm (0.94in x 1.1in x 0.3in)
  • 3.24g ( 0.14oz)

Features

  • Level shifting circuitry means that its trivial to connect it to 5V circuitry such as an Arduino without risk of damage
  • Two LEDs, one for activity (RSSI), the other for power (Associate)
  • 10-pin 2mm sockets included to protect the modem and allow easy swapping, upgrading or recycling
  • All the commonly used pins are brought out along the edge, making it easy to breadboard or wire up
  • Specifically created for use with an FTDI cable to connect to a computer via USB. This means that you can use, configure or upgrade the adapter painlessly simply by plugging in a cable:

Application

  • Wireless communication

 

Write Your Own Review

You're reviewing: XBee 2mW - Series 2

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Product Review