Raspberry Pi POE HAT

SKU
TIFC00069
Rating:
93% of 100
In stock
Special Price Rs 1,839.62 Rs 1,559.00 was Rs 2,891.00
Raspberry Pi Power over Ethernet (PoE) is an add-on board for the Raspberry Pi 3B+. Use this HAT to power a Raspberry Pi via an Ethernet cable, removing the need for a separate power supply, an ideal solution for embedded and IoT project.
  • Power over Ethernet 802.3af compliant
  • Class 2 device
  • Fully isolate Switched-Mode Power Supply (SMPS)
  • 36-56V Input Voltage
  • 5V Output Voltage
  • Supplies up to 2.5A
  • Fan Control
  • Plug-and-play compatibility with Raspberry Pi 3 Model B+
  • -
    +
    The Raspberry Pi Power over Ethernet HAT is a small accessory for the Raspberry Pi computer. It can only be used with the Raspberry Pi 3 Model B+ (launched March 2018). The PoE HAT allows you to power your Raspberry Pi using Power over Ethernet–enabled networks; for this product to be used, the network it is connected to needs to have power-sourcing equipment installed. Supplied with this product Raspberry Pi PoE HATMechanical spacers Other hardware needed A RASPBERRY PI 3 Model B+ An Ethernet cablePower-sourcing equipment for an 802.3af Power over Ethernet network Connecting your PoE HAT to the Raspberry Pi Before installing the PoE HAT, you must attach the supplied spacers in the four corners of the board then connect the Raspberry Pi PoE HAT to the two 0.1” headers (40 + 4) that are fitted on the Raspberry Pi once the PoE HAT board is connected, you can power the Raspberry Pi through its RJ45 network connector Additional information No modification to the main Raspberry Pi board is needed for this product to work. Please ensure that your Raspberry Pi’s software is up to date for all functionality to be available. The PoE HAT is fitted with a small fan that is controlled by the Raspberry Pi via I2C. The fan will turn on and off automatically depending on the temperature of the main processor on the Raspberry Pi. The PoE HAT allows you to power your Raspberry Pi using Power over Ethernet–enabled networks. For this product to be used, the network it is connected to needs to have power-sourcing equipment installed. Before installing the PoE Hat, you must attach the supplied spacers in the four corners of the board Then connect the Raspberry Pi PoE HAT to the two 0.1” headers (40 + 4) that are fitted on the Raspberry Pi Once the PoE HAT board is connected, you can power the Raspberry Pi through its RJ45 network connector Kit Contain Raspberry Pi PoE Hat & Mechanical spacers.
    More Information
    Bestseller No
    Is Featured No
    rpi No
    HOT DEALS No
    Write Your Own Review
    You're reviewing:Raspberry Pi POE HAT
    Your Rating

    Free Shipping

    On Orders Over Rs 1,500/-

    Accept payments online

    10 Day Refund Policy

    Safe Transactions

    Same Day Shipping

    0 / 5
    Contact Us