Our prices are exclusive of Taxes and Shipping. 18% GST shall be applicable on Check Out. Happy Shopping! :) 
080 4851 1516 info@robocraze.com

Robocraze Welcome to Robocraze

RASPBERRY Pi PoE Hat - Add-On Board, Power Over Ethernet (PoE) HAT For Raspberry Pi 3B+

Hover on above image to view it large

More Views

RASPBERRY Pi PoE Hat - Add-On Board, Power Over Ethernet (PoE) HAT For Raspberry Pi 3B+

Be the first to review this product

Rs. 1,716.00

Availability: In stock

Raspberry Pi Power over Ethernet (PoE) is an add-on board for the Raspberry Pi 3B+. Use this HAT to power a Raspberry Pi via an Ethernet cable, removing the need for a separate power supply, an ideal solution for embedded and IoT project.

  • Power over Ethernet 802.3af compliant

  • Class 2 device

  • Fully isolate Switched-Mode Power Supply (SMPS)

  • 36-56V Input Voltage

  • 5V Output Voltage

  • Supplies up to 2.5A

  • Fan Control

  • Plug-and-play compatibility with Raspberry Pi 3 Model B+

  • The Raspberry Pi Power over Ethernet HAT is a small accessory for the Raspberry Pi computer. It can only be used with the Raspberry Pi 3 Model B+ (launched March 2018). The PoE HAT allows you to power your Raspberry Pi using Power over Ethernet–enabled networks; for this product to be used, the network it is connected to needs to have power-sourcing equipment installed. Supplied with this product Raspberry Pi PoE HATMechanical spacers Other hardware needed A RASPBERRY PI 3 Model B+ An Ethernet cablePower-sourcing equipment for an 802.3af Power over Ethernet network Connecting your PoE HAT to the Raspberry Pi Before installing the PoE HAT, you must attach the supplied spacers in the four corners of the board then connect the Raspberry Pi PoE HAT to the two 0.1” headers (40 + 4) that are fitted on the Raspberry Pi once the PoE HAT board is connected, you can power the Raspberry Pi through its RJ45 network connector Additional information No modification to the main Raspberry Pi board is needed for this product to work. Please ensure that your Raspberry Pi’s software is up to date for all functionality to be available. The PoE HAT is fitted with a small fan that is controlled by the Raspberry Pi via I2C. The fan will turn on and off automatically depending on the temperature of the main processor on the Raspberry Pi. The PoE HAT allows you to power your Raspberry Pi using Power over Ethernet–enabled networks. For this product to be used, the network it is connected to needs to have power-sourcing equipment installed. Before installing the PoE Hat, you must attach the supplied spacers in the four corners of the board Then connect the Raspberry Pi PoE HAT to the two 0.1” headers (40 + 4) that are fitted on the Raspberry Pi Once the PoE HAT board is connected, you can power the Raspberry Pi through its RJ45 network connector Kit Contain Raspberry Pi PoE Hat & Mechanical spacers.

    Write Your Own Review

    You're reviewing: RASPBERRY Pi PoE Hat - Add-On Board, Power Over Ethernet (PoE) HAT For Raspberry Pi 3B+

    How do you rate this product? *

      1 star 2 stars 3 stars 4 stars 5 stars
    Product Review