Our prices are exclusive of taxes and shipping. 18% GST shall be added during check out. Happy Shopping! :)  

Robocraze Welcome to Robocraze

NRF24L01+PA+LNA SMA Antenna Wireless Transceiver communication module 2.4G 1100m

Hover on above image to view it large

More Views

  • NRF24L01+PA+LNA SMA Antenna Wireless Transceiver communication module 2.4G 1100m
NRF24L01+PA+LNA
Rs. 314.34

Availability: In stock

nRF24L01p(nRF24L01+) with PA and LNA is compatible with nRF24L01+(nRF24L01p),and there are same interface. These are add a power amplifier(PA) circuit and Low Noise Amplifier(LNA) circuit, which could transmit longer distances and more stable performance for industry standard. Increased PA and LNA, RF switch, band pass filter, formed a professional full two-way RF power amplifier, making effective communication for greatly increased. The transmission distance to reach 1000 meter with 2DB Antenna at 250kbps data rate on open area.

Feature

  • Worldwide 2.4GHz ISM band operation,Free license to use.
  • 126 RF channels.
  • High air data rate: 250kbps, 1 and 2Mbps.
  • Transmitter: 11.3mA at 0dBm output power.
  • Receiver: Fast AGC for improved dynamic range.
  • Receiver: Integrated channel filters.
  • Enhanced ShockBurst™:1 to 32 bytes dynamic payload length,6 data pipe MultiCeiver™ for 1:6 star networks.
  • Host Interface:4-pin hardware SPI,3 separate 32 bytes TX and RX FIFOs.
  • Low Power Management:1.9 to 3.6V supply range.
  • GFSK modulation.
  • Auto packet transaction handling.
  • Easy for designed.
  • Small size:16.5mm*45.5mm.

 

Application Ideas

  • Wireless PC Peripherals
  • Mouse, keyboards and remotes
  • 3-in-1 desktop bundles
  • Advanced Media center remote controls
  • VoIP headsets
  • Game controllers
  • Sports watches and sensors
  • RF remote controls for consumer electronics
  • Home and commercial automation
  • Ultra low power sensor networks
  • Active RFID
  • Asset tracking systems
  • Toys

 

Cautions

  • VCC is range of 1.9V~3.6V, do not exceed this range, otherwise it by destroyed the module.
  • Except of VCC and GNDthe other pins can be direct connected to 5V Microprocessor's IO, needless level converter. Of course 3V Microprocessor's IO more applied.
  • If the Microprocessor isn't hardware SPI interface, could be simulated with ordinary IO.
  • If connected to 51 series MCU's P0, there is a 10K Pull-up resistor need others Port needless.
  • If Microprocessor IO more than 10mAneed connect 2K resistive divider. It could direct connected to AVR Series.

 

Customer Reviews

1 Review(s)

per page
Nice Review by Kunal GiriVerified Buyer
Product Review
Happy with the product. On time delivery and helped me in my RFID project. (Posted on 5/22/2018)

Write Your Own Review

You're reviewing: NRF24L01+PA+LNA

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Product Review
Related Products

Check items to add to the cart or select all