Best charger in budget
It's exactly as mentioned, charges well, and does the job perfectly! I'm very happy with the purchase. Thank you.
The iMax B3 Pro LiPo battery charger is a compact and powerful 2/3 cell LiPo battery charger that features built-in JST-XH balance plug ports and 3 LEDs to indicate the charge status on each cell.
This Lipo battery charger takes 100-240V AC input, and the high-precision balance circuit can supply a large current of up to 800mA per cell. The dual colour LEDs display the status of charging on each cell (RED: charging; GREEN: full). This charger is compact and lightweight and there are separate balance ports for 2 and 3 cell batteries. The B3 Pro is a compact Charger that can be used to charge your lithium polymer battery packs. It is commonly used to charge your drone and other RC batteries that are in 2S or 3S configuration.
Also check SKYRC PC1080 Dual Channel LiPo Battery Charger. It has a variety of features, including a battery voltage meter, internal resistance meter, and synchronization mode. It is also compatible with high-voltage LiPo batteries.
Brand | iMax |
Model | B3 Pro |
Compatible batteries |
2 or 3 cell LiPo batteries |
Input voltage | AC 110V-240V |
Balance charge current | 800mAh per cell (3 x 800mA max. current) |
For more details, please check our Shipping and Return Policy
Simply plug the B3 into a wall outlet, and the three LEDs will light up green before flashing red to indicate that the charger is ready. Connect your battery's balance lead to the charger's balance port; the charger detects the battery's voltage and begins charging after 2 seconds.
If charging is required, drain the batteries briefly before attempting again. The battery voltage is too low if the light blinks red after 90 seconds of battery insertion. Leave the batteries in the charger for about 24 hours while the light continues to blink red. After that, take out the battery and try again.
LiPo's work on the principle of lithium-ion intercalation and de-intercalation between a positive electrode and a negative electrode, with a conductive medium provided by a liquid electrolyte.
The blinking LEDs indicate the different charge statuses: Short green flash indicates that the battery is less than 80% charged. A long green flash indicates that you are more than 80% charged. 100 percent charged = solid green light.
To test the charger's output, connect the battery to the charger and turn on the charger. The meter should read near or equal to the battery's rated voltage. If it doesn't, the charger fails. It is also a good idea to test the charger's current output.
It's exactly as mentioned, charges well, and does the job perfectly! I'm very happy with the purchase. Thank you.
I used it to charge my 3s Lipo battery, and it didn't get too hot and charged quickly. It managed to fully charge two batteries without any issues so far.
100% genuine products and fast delivery
Fast delivery Quality products
Products are cheaper as compared to other websites and quality was excellent. Go for it
I recently purchase this battery charger it is awesome one product working was very good. There is small heating issue was happening but it is normal.
Bettery charger working perfectly.
Good value for money, sturdy components, cheap and reliable, this is a good as the more expensive options
It's good, even the plastic is of good quality, and wire is long enough. All LED's were green on power on and changed to red after connecting the battery. A good buy at reasonable price.
Lipo Balance charger circuit is very good
© 2023, TIF Labs Pvt. Ltd.