1.What is the ESP WiFi Module in IoT?

ESP is a microcontroller by a company called Expressif. They mainly come in two versions ESP8266 (NodeMCU) and it’s successor, the more powerful ESP32. Both ESP are compact and have in built Wifi in them allowing you to make it the main brains of any IoT product

2.What are the types of ESP WiFi Modules?

ESP’s come in mainly two types ESP8266 & ESP32. They vary in their specs, with ESP32 being the more powerful version. Other boards are based on one of these two microcontrollers like the ESP32 Cam module which is a camera module with ESP32 built in.

3.What does an ESP WiFi Module do?

ESP modules can be programmed to do anything. It is considered as a better version of Arduino as it has features like built-in wifi, compact design and many GPIO pins for interfacing. It is suitable for most IoT products

1.How does ESP8266 work?

ESP8266 is a microcontroller that can be programmed using an Arduino IDE or ESP-IDF. It is developed by Expressif and can be used for various purposes.

2.What is the range of the ESP8266 WiFi Module?

With the built-in antenna, the ESP only has a range of about a couple of meters. However the range can be extended using an external antenna.

3.How do I test the ESP8266 8266WiFi Module?

You can check whether the ESP module is fully functioning by running an example code under ESP8266Wifi called “Wifi Scan” provided in the ESP8266 library. This will scan for available wifi networks and print it out on your serial monitor. Thus you can ensure that the module works as the way it should

4.How can I connect the ESP 8266 WiFi Module to Arduino

ESP8266 can be connected to Arduino via the UART pins. Enable SoftwareSerial on Arduino via IDE and connect the Tx and Rx pins of the ESP module to the Rx and Tx you have defined in your codeVCC of ESP has to be connected to 3.3VGND of the ESP needs to be connected to GND of ArduinoWith UART line enabled, you can share any information between ESP and the Arduino vial Serial.print() command in the Arduino IDE.

6.What is ESP 32 used for?

ESP32 can be used for almost any IoT product. Due to their compact design and a lot of available features and GPIO pins, it is an ideal microcontroller to be used as the brains of any low powered device. It is a fantastic replacement for Arduino and an improved version of ESP8266.

7.What is the ESP32 camera Module?

ESP32 Camera Module is a tiny camera that comes with an ESP32 chip as well as an SD Card. It was created by AIThinker and it is an integrated, cheap and all in one module in case you have a specific application of using cameras with a microcontroller.

8.What is the difference between ESP 32 and ESP 8266 WiFi Module?

There are a few key differences in capability between EP8266 and ESP32 - ESP32 being the overall better version. Few of the main differences are listed below:ESP32ESP8266Dual Core ProcessorSingle Core ProcessorBluetooth 4.0No Bluetooth36 GPIO Pins17 GPIO Pine16 PWM Pins8 PWM Pins4 SPI Channels2 SPI ChannelsCapable of supporting CAN networksDoes not support CAN Networks

11. What are some popular ESP32 IoT projects?

Here are some typical issues you may encounter when working with ESP32 and their troubleshooting steps:Failed to connect to ESP32: Ensure that your ESP32 is correctly connected to your computer and that you have selected the correct COM port in the Arduino IDE. You can also try resetting the ESP32 by pressing the EN button or power cycling it.Brownout detector or Guru meditation error: This error indicates a hardware problem, potentially caused by a power supply issue or a faulty ESP32. Try using a different power supply or replacing the ESP32.Sketch too big error: This error occurs when your sketch size exceeds the available flash memory on the ESP32. Reduce the sketch size by removing unnecessary code or using a different partition scheme.USB drivers are not installed: If you have trouble uploading sketches to your ESP32, ensure that the USB drivers are properly installed on your computer. You can also try using a different USB cable or port.Camera init failed with error 0x20001 or similar: This error suggests an issue with the camera module. Verify that the camera is correctly connected to the ESP32 and that you have selected the appropriate camera model in your code.Weak Wi-Fi signal: If you struggle to connect to a Wi-Fi network, ensure that the signal strength is sufficient. Consider moving the ESP32 closer to the router or using a Wi-Fi extender.Psram error: GPIO isr service is not installed: This error points to a problem with the PSRAM module. Confirm that the PSRAM is properly connected to the ESP32 and that you have enabled it in your code.

14. How can I set up ESP8266 for my IoT project?

To set up the ESP8266 for your IoT project, you can follow these general steps:Select your hardware: Various ESP8266 boards, such as the Wemos D1 Mini or NodeMCU, are accessible. Choose the board that best suits your project's prerequisites.Incorporate the ESP8266 board into the Arduino IDE: Utilize the Arduino Board Manager to set up the ESP8266. More comprehensive instructions are accessible on diverse websites.Establish a connection between the ESP8266 and your Wi-Fi network: Implement the ESP8266WiFi library to connect your ESP8266 to the designated Wi-Fi network. Ensure to provide the network's SSID and password.Compose your code: Employ the Arduino IDE or any compatible IDE to write your code. Abundant online examples and tutorials are available for reference.Verify your project: Upload the code to the ESP8266 and scrutinize the functionality of your project. Leverage serial communication to debug your code and monitor the project's output.These steps serve as general guidelines, subject to variation based on the specific requirements of your project. An array of tutorials and examples can be found online, offering comprehensive assistance for initiating your ESP8266 project.

16. Is ESP8266 compatible with different sensors and modules?

Yes, the ESP8266 demonstrates compatibility with a diverse range of sensors and modules. As an exceptionally adaptable microcontroller, the ESP8266 seamlessly interfaces with various sensors and modules. Leveraging its foundation on the ESP8266, it seamlessly integrates with the Arduino IDE through the board manager. Notably, the ESP8266 NodeMCU boards excel in compatibility with a wide array of sensors, modules, and peripherals. To establish connections between multiple sensors and the ESP8266, the utilization of an i2c A/D converter, such as the ADS1015, proves effective. Primarily employed in the development of embedded systems for IoT (Internet of Things), the ESP8266 assumes a dual role, effectively serving as either a host for applications or relieving the application processor of Wi-Fi networking functions. By skillfully integrating the ESP8266 with diverse sensors and modules, the successful realization of your IoT project becomes attainable.

17. Are these modules compatible with Arduino IDE?

Yes, both the ESP8266 Serial WiFi Module and ESP32 NodeMCU Development Board are compatible with the Arduino IDE. You can select the board from the Arduino Board Manager, install the appropriate core, and program them just like an Arduino. The product descriptions of the collection mention that these modules work with Arduino-style development.

18. Can these boards be used for IoT and automation projects?

Absolutely. The ESP series boards in the collection feature Wi-Fi (and on the ESP32 boards even Bluetooth), making them very suitable for IoT, automation, sensor networks, home-automation systems, robotics controllers and connected devices. For example, the ESP32 development board listing highlights WiFi + Bluetooth and states it’s “your key to unlocking the world of IoT, home automation and robotics”.

19. What are the memory and processing specifications of ESP8266 & ESP32?

The ESP8266 (e.g., modules in the collection) typically feature a single-core microcontroller, running at around 80 MHz (sometimes up to 160 MHz), Flash memory of ~4 MB (in many board variants) and RAM of tens to hundreds of kilobytes. The ESP32 offers more. For example the board listing mentions a dual-core 32-bit processor running at 160-240 MHz and supports WiFi + Bluetooth, with more GPIOs and peripherals.

20. Do these boards include USB interface and GPIO pins for easy prototyping?

Yes. Development boards in the collection include USB (for power and programming) and expose a range of GPIO pins, making them easy to prototype with. For instance, the ESP32 development board listing clearly shows 38 pins and standard header layout. This makes it easier to connect sensors, actuators and other modules

ESP WiFi Modules & Boards - ESP8266 & ESP32 Development Kits

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Example product title

Rs. 20; Rs. 20
Unit price: per

Product	Price
ESP32 Camera Module	Rs.485
ESP8266-01	Rs.126
ESP8266-12e	Rs.129
NodeMCU-32 Wifi+Bluetooth ESP32 Development Board(38 Pin)	Rs.419
Node MCU ESP8266 V3 (LOLIN CH340 chip)	Rs.222
ESP32 Node MCU Development Board with Wifi and Bluetooth (CP2102 Driver, 30 PIN)	Rs.389
ESP-12 D1 Mini V2 Board	Rs.225
ESP12E Amica NodeMCU	Rs.334
ESP8266 Wroom Downloader	Rs.836
5V ESP8266 WiFi Relay Module	Rs.310
Witty Cloud ESP12F Module	Rs.344
USB to UART ESP-01 CH340 Programmer	Rs.134
Wii-Link N2450 2.4 Ghz 4DB WiFi Omnidirectional Antenna - IPEX-IPX (Set of 2)	Rs.169
ESP32 LoRa with Display - 863MHz-928MHz SX1276	Rs.2230
Lolin Node MCU base	Rs.177
Witty Fox - ESP32 Storm Board	Rs.841
Witty Fox - ESP32 Storm Board with On-Board Li-ion Battery & Wireless Programming	Rs.1157
ESP-01S DHT11 Temperature Humidity Sensor module	Rs.223
Seeed Studio Wio Link Wireless Development Board	Rs.1116
ESP-07 Wifi Module	Rs.211
Ai Thinker ESP-01F ESP8285 Serial WiFi Module	Rs.174
ESP8285 Wi-Fi SoC Module	Rs.287
ESP32 WROOM CHIP	Rs.331
ESP8266 12F	Rs.125
ESP32 Wroom Programming Jig	Rs.1139
WeMos Lolin V1.0 wifi+Bluetooth	Rs.839
IOT Starter Kit	Rs.2044
WiFi Kit 32	Rs.1699
Witty Fox - ESP Programmer \| USB to TTL Converter	Rs.278
ESP8266 12F	Rs.125
MH-ET Live ESP 32 Module	Rs.758

All Categories

ESP WiFi Modules & Boards - ESP8266 & ESP32 Development Kits

Categories

Refined By Clear all

Availability

Price

Featured Products

Sort by:

Recently Viewed Products

All About ESP Module

ESP Collection Categories

1. ESP8266 Modules

2. ESP32 Modules

3. Development Boards

4. IoT Kits

Applications for ESP Modules & Boards

1. IoT Projects

2. Home Automation

3. Robotics

Wiring Examples

ESP8266 Wiring

ESP32 Wiring

Development Board Wiring

IoT Kit Wiring

Setup Examples

ESP8266 Setup

ESP32 Setup

Development Board Setup

IoT Kit Setup

Code Examples

ESP8266 Sample Code

ESP32 Sample Code

Development Board “Blink” Code

IoT Kit Sensor Example

Firmware & Software Support

1. Witty Cloud ESP12F Module

2. ESP8285 Wi‑Fi SoC Module

3. Heltec WiFi Kit 32 (V3)

Tips for Best WiFi Connectivity & Project Optimization

1. Use WiFiManager for Easy & Reliable Setup

2. Choose the Right WiFi Channel & Bandwidth

3. Optimize Power Management

4. Adjust Transmit Power Carefully

5. Improve Reliability with Network Selection & Static IP

Prices of ESP WIFI Modules

Frequently Asked Questions

1.What is the ESP WiFi Module in IoT?

ESP is a microcontroller by a company called Expressif. They mainly come in two versions ESP8266 (NodeMCU) and it’s successor, the more powerful ESP32. Both ESP are compact and have in built Wifi in them allowing you to make it the main brains of any IoT product

2.What are the types of ESP WiFi Modules?

ESP’s come in mainly two types ESP8266 & ESP32. They vary in their specs, with ESP32 being the more powerful version. Other boards are based on one of these two microcontrollers like the ESP32 Cam module which is a camera module with ESP32 built in.

3.What does an ESP WiFi Module do?

ESP modules can be programmed to do anything. It is considered as a better version of Arduino as it has features like built-in wifi, compact design and many GPIO pins for interfacing. It is suitable for most IoT products

4.Which ESP WiFi module is the best for a robotics project?

ESP32 might be better suited for robotics as it has a more powerful dual core processor, bluetooth and a lot more GPIO pins to interface with various sensors and actuators that may be required in a robotics project - as compared to ESP8266

Things to Consider before buying ESP-8266

1.How does ESP8266 work?

ESP8266 is a microcontroller that can be programmed using an Arduino IDE or ESP-IDF. It is developed by Expressif and can be used for various purposes.

2.What is the range of the ESP8266 WiFi Module?

With the built-in antenna, the ESP only has a range of about a couple of meters. However the range can be extended using an external antenna.

3.How do I test the ESP8266 8266WiFi Module?

4.How can I connect the ESP 8266 WiFi Module to Arduino

ESP8266 can be connected to Arduino via the UART pins.

Enable SoftwareSerial on Arduino via IDE and connect the Tx and Rx pins of the ESP module to the Rx and Tx you have defined in your code

VCC of ESP has to be connected to 3.3V

GND of the ESP needs to be connected to GND of Arduino

With UART line enabled, you can share any information between ESP and the Arduino vial Serial.print() command in the Arduino IDE.

5.How do I connect an ESP 32 to WiFi?

ESP32 can be connected to Wifi the same way as ESP8266. Assuming you have the ESP32 board installed in your Arduino IDE, you can proceed to write the below code, replacing the ssid and password with your own network’s

6.What is ESP 32 used for?

ESP32 can be used for almost any IoT product. Due to their compact design and a lot of available features and GPIO pins, it is an ideal microcontroller to be used as the brains of any low powered device. It is a fantastic replacement for Arduino and an improved version of ESP8266.

7.What is the ESP32 camera Module?

ESP32 Camera Module is a tiny camera that comes with an ESP32 chip as well as an SD Card. It was created by AIThinker and it is an integrated, cheap and all in one module in case you have a specific application of using cameras with a microcontroller.

8.What is the difference between ESP 32 and ESP 8266 WiFi Module?

There are a few key differences in capability between EP8266 and ESP32 - ESP32 being the overall better version. Few of the main differences are listed below:

Dual Core Processor

Single Core Processor

Bluetooth 4.0

No Bluetooth

36 GPIO Pins

17 GPIO Pine

1. Witty Cloud ESP12F Module

2. ESP8285 Wi‑Fi SoC Module

3. Heltec WiFi Kit 32 (V3)