Our prices are exclusive of taxes and shipping. 18% GST shall be added during check out. Happy Shopping! :)  

Robocraze Welcome to Robocraze

Peltire Robocraze

Hover on above image to view it large

More Views

  • Peltire Robocraze
TEC1 12706 Thermoelectric Peltier Cooler or Cooling module 12V 92W

Be the first to review this product

Rs. 165.00

Availability: In stock

TEC1 - 12706 Thermoelectric Cooler Peltier or Cooling module 12V 60W (92W Maximum) Power Cord Length: ~100mm
Note: hot side needs heat sink all the time.


  • Thermoelectric Peltier cooler or generator TEC1-12706

  • Create a temperature differential on each side

  • One side gets hot and the other side gets cool

  • Designed for cooling and heating up to 90 degree Celsius applications
  • TEC1 - 12706 Heatsink Thermoelectric Cooler Cooling Peltier Plate Module 12V 60W Features: - Get ice cold in minutes or heat to boiling by simply reversing the polarity, - Used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler. - Since they consist primarily of semiconductor material sandwiched between ceramic plates and have no moving parts -These devices must be used in conjunction with a heat sink to avoid burned - Each device is fully inspected and tested - Fitted with 6-inch insulated leads Technical Specifications: -Model: TEC1-12706 -Size: 40mm x 40mm x 4mm -Operates from 0~15.2V DC and 0~6A -Operates Temperature: -30℃ to 70℃ -Max power consumption: 60 Watts -Original box: NO -Net weight: 22g -Package weight: 31g -Colour: White installation: Cooling piece is very simple to install and use. Before installation, to find a dry cell, connected to the two leads of the cooler, obviously cold you can feel at one end and the other end of fever, remember that the polarity of the lead and determine a good cooler cold and hot end. If you want to get a bigger system Ling, it is recommended that two cooling modes, with two stack up with the above, a grim absorption following a fever, the experiments prove two refrigeration effect is much better than the single-stage, the condition can choose three, of course, have a large power supply support. How to Use: Prepare five things, Thermoelectric Cooler + heatsink + Grease + potholder + power. Coated with silicone grease on both sides of the thermoelectric cooler. Place the thermoelectric cooler on a heat sink with a potholder in the middle. Tighten the screws. Powered, and it starts cooling. IMPORTANT NOTE- Do not power the device without proper Heat-sink setup to avoid burnt/damage Package Content: 1 x Thermoelectric Cooler

    Write Your Own Review

    You're reviewing: TEC1 12706 Thermoelectric Peltier Cooler or Cooling module 12V 92W

    How do you rate this product? *

      1 star 2 stars 3 stars 4 stars 5 stars
    Product Review
    Related Products

    Check items to add to the cart or select all