Buy Electronic Components

Whether you are looking to create a kickass robotics project or need electronic components for your industrial use-case, we have you covered!

ICs  | Passive Components| LEDs | Resistors | Capacitors | Diodes | Pots & Presets | InductorsRelays | Switches & Keypads | Transistors & Amplifiers | Buzzers | Breadboard & Wires | Connectors & Terminal Blocks | Mechanical Tools | Soldering & Glue Guns | Multimeters & Voltmeters | Magnets | Batteries | Power Supply & Converters | Heat Sinks | Thermostats

View as Grid List

291 items

Page
Set Descending Direction
per page
  1. -
    +
    Compare
    1 Metre 24 SWG Nichrome Wire
    Special Price Rs 214.76 Rs 182.00 was Rs 322.14
  2. -
    +
    Compare
    DC to DC 3.5V-28V to 1.25V-26V Solar Automatic Lifting Pressure Module
    Special Price Rs 592.36 Rs 502.00 was Rs 889.72
  3. -
    +
    Compare
    LM317 AC to DC Converter Step Down Power Supply
    Special Price Rs 238.36 Rs 202.00 was Rs 542.80
  4. Out of stock
    Compare
    0-100(99.9)V Digital Voltmeter Panel
    Special Price Rs 230.01 Rs 194.92 was Rs 540.44
  5. Out of stock
    Compare
    0.5W Speaker
    Special Price Rs 151.04 Rs 128.00 was Rs 542.80
  6. -
    +
    Compare
    1 CH 5V Relay Board
    Rs 194.70 Rs 165.00
  7. -
    +
    Compare
    1 x 4 Membrane Keypad
    Special Price Rs 189.98 Rs 161.00 was Rs 651.36
  8. -
    +
    Compare
    1-CH 12V Relay Board
    Special Price Rs 108.56 Rs 92.00 was Rs 217.12
  9. -
    +
    Compare
    1.3in OLED Display
    Special Price Rs 702.10 Rs 595.00 was Rs 1,053.74
  10. -
    +
    Compare
    1024*600 Resolution 7 inch LCD Capacitive Touch Panel with HDMI + USB Cable
    Special Price Rs 6,964.36 Rs 5,902.00 was Rs 9,511.98
  11. Out of stock
    Compare
    10K Sliding Potentiometer
    Special Price Rs 287.92 Rs 244.00 was Rs 811.84
  12. Out of stock
    Compare
    10mm Conductive Copper Tape Adhesive
    Special Price Rs 540.44 Rs 458.00 was Rs 1,294.46
  13. -
    +
    Compare
    10mm X 33mm Heat Resistant Polyimide High Temperature Adhesive Insulation Tape
    Special Price Rs 539.26 Rs 457.00 was Rs 809.48
  14. Out of stock
    Compare
    11.1V 3300mAH LiPo
    Rs 2,528.74 Rs 2,143.00
  15. -
    +
    Compare
    11.1V 4500mAh Lipo Battery
    Rs 5,982.60 Rs 5,070.00
  16. Out of stock
    Compare
    11.1V 5400mAH LiPo
    Special Price Rs 4,756.58 Rs 4,031.00 was Rs 7,135.46
  17. -
    +
    Compare
    11.1V 5500mAh Lipo Battery
    Rs 5,074.00 Rs 4,300.00
  18. -
    +
    Compare
    12 V 1 Channel Relay Board
    Special Price Rs 224.20 Rs 190.00 was Rs 337.48
  19. Out of stock
    Compare
    12 Volt Piezo Buzzer Plate (Small)
    Rs 20.06 Rs 17.00
View as Grid List

291 items

Page
Set Descending Direction
per page

#1. Where should I buy electronic components in India?

Buy electronic components at an online store

Buying electronic components at an online store is a relatively hassle-free way to get the components you need, from the comfort of your home. Online stores like Robocraze provide a wide range of components and kits that you may require for a project. It would also give you a convenient way to easily cross check part numbers/model numbers to make sure it is exactly what you need. Robocraze provides easy shopping, fast delivery and great tech support to help you troubleshoot your technical queries.

Buy electronic components at a shop near you

At Bangalore
#822, 9th Main, 1st C Cross, HRBR Layout 1st Block, Banaswadi - 560043

At Hyderabad
#101-C, RKR Plaza, Pillar No 119, Attapur - 500048

At Ahmedabad
Shop No 5, Sumatinath Complex, Opp Kothawala Flats, Pritam Nagar, Paldi - 380006 

At Mangalore
#3-E-17-T-1417/1 (Behind Nanthoor Bus Stand - 575002

#2. Electronic components price in India - online

Electronic component price list in India 2020:

 

 

Electronic component name

Price (in INR)

LEDs

1 - 10

ICs

5 - 300

Resistors

20 - 50

Potentiometers

5 - 20

Capacitors

20 - 50

Inductors

20 - 50

Transistors

5 - 50

Diodes

10 - 20

Relays

25 - 100

Switches

10 - 100

Buzzers

10 - 25

Breadboard

45 - 150

Jumper Wires (Set of 10)

30 - 80

Soldering Kits

200 - 500

Multimeters

150 - 1000

Batteries

5 - 1200

Power Supply & Convertors

5 - 250

Thermostat

5 - 200

 

Buying discrete electronic components vs integrated kits: Which of the two is better?

If you are quite seasoned with the DIY electronics world, you can opt to buy the discrete electronic components you require for your projects.

However, if you’re new to the hobbyist world, and you wish to learn about hobby-grade electronics and microcontrollers, it is highly recommended to purchase integrated electronic component kits, as it would provide you with all the essential components required to help you get started with basic projects. Moreover, from a financial standpoint, it might be more beneficial to buy an integrated kit as opposed to getting all of the components individually.

How to test/check electronic components?

With a digital multimeter

Resistors: Set the multimeter in resistance mode, and measure the resistance across the multimeter. The reading should correspond to an approximate value of the resistor, which you may cross-verify by calculating the colour codes on the resistor.

Capacitors: Set the multimeter in continuity mode and check for a beep as you connect the leads across the resistors. If it does, the capacitor is blown out as capacitors aren’t supposed to conduct DC currents.

LED: Set the multimeter in continuity mode and check if the LED glows when you connect the leads across the appropriate (positive and negative) terminals. If it does, your LED works fine.

Diodes: Set the multimeter in diode mode, and measure the forward bias voltage. For a silicon diode, it should be between 0.5-0.7 V, and for a germanium diode it should be 0.2-0.3 V. In case if it shows O.L or values lesser than stated, the diodes are either blown out or shorted out, respectively.

With a circuit board

LED: You can construct a circuit that takes 5V input to the positive lead of the LED, with a 330+ ohm resistor in between the power source and the LED, connected in series (to limit the current). The negative lead should be connected to the ground. If the LED glows when the supply is turned on, it indicates that the LED works fine.

Resistors and capacitors - can be checked if it’s functioning properly by measuring the voltage between the two leads with a multimeter while in operation.