Robocraze 4.3 inch Serial Interface Electronic Paper Display
Out of stock
Rs 6,747.24 Rs 5,718.00
Easy to use, displays any contents via one serial interface, including geometric graphics, texts, and images Embedded font libraries, supports 32, 48 and 64 dot matrix GBK Chinese fonts and English fonts Built-in 128MB NandFlash, allows the font/image data to be stored in either an external TF card or the internal NandFlash 4 grey level displaying, 800×600 resolution Adjustable serial interface baud rate, 115200 by default when power up Powered from 3.3V to 5V, compatible with logic level Ultra low power consumption, sleeping current lower than 5mA Comes with host computer software, control it directly on your computer
This E-Ink display module, 4.3inch, 800×600 resolution, with with serial interface and embedded font libraries, is very much user friendly compared to the available counterparts. You don't have to know anything about the complex underlying details of e-Paper, nor the specific algorithms of displaying graphics, texts, and images. All it needs is the serial interface, and all it matters is your creativity.
Write Your Own Review
We found other products you might like!
Check items to add to the cart or
Robocraze 3.5 inch Touch Display for Raspberry PiSpecial Price Rs 1,414.82 Rs 1,199.00 was Rs 2,121.64HC-12Special Price Rs 480.26 Rs 407.00 was Rs 719.80
Robocraze Sim800 GSM/GPRS/Bluetooth Serial & TTL ModemRs 1,168.20 Rs 990.00Witty Cloud ESP12F Module - Cloud Development BoardSpecial Price Rs 234.82 Rs 199.00 was Rs 295.00