Great at cooling
I use this with water cooling, and it works really well. It gets so cold that the heat sink actually frosts up.
Semiconductor coolers are a form of solid-state cooling that incorporates both semiconductor technologies and electronic assembly techniques. The thermoelectric Peltier refrigeration cooling system DIY kit is one such example.
The DIY kit is a semiconductor cooling kit that uses a TEC1-12706 Thermoelectric Cooler Peltier Module. The kit has 2 heat sinks, the bigger one is for the hotter side and the smaller one is for the cooler side. The bigger the heat sink, the greater dissipation of the heat.
The fan, also included in this kit acts as a radiator. This is attached to the bigger heat sink. The TEC1-12706 thermoelectric Peltier module is sandwiched between the two heat sinks. The module will reduce the temperature.
Note: This is an unassembled kit.
Read our blog Peltier module working principle where we explained what is a Peltier Cooler, how it works, things to keep in mind while using a Peltier, and applications of Peltier.
Voltage | 12 - 15 VDC |
Operating Current | 6A |
Material | Metal and plastic |
Dimensions in mm (LxWxH) | 220 x 140 x 40 |
Weight (gm) | 390 |
For more details, please check our Shipping and Return Policy
I use this with water cooling, and it works really well. It gets so cold that the heat sink actually frosts up.
Best quality products
it cooling temp -8 "c,
Every thing is good but peltier module is not good. Power consumption only 12v 2.5A.
It is working as per my need
I like this product
Osm product quality and low price and fast delivery love you robocraze website
I like your products
I proud of your excellent service. Thanks,
Good service by robocraze team. Any one can trust and buy anything from here
Material received after 10 days, need to improve courier services. Material quality good, working satisfactory.
Quality product at best price, happy with the decision to purchase
Hello sir, Yes, it contains a fan with screws.
Hello, it has 12706 Peltier module with the kit.
Hello, any power supply that is capable of producing a maximum of 16.4V and 6.4A.
To design a cooling system you can use 1 or 2 TEC-12706 PELTIER , a temperature sensor, relay, fan and an Arduino. connect the +5v and GND of temperature and a output pin to the data pin of Arduino. connect the Peltier to the relay and connect the relay to any of the Arduino data pins and also connect the fan to the supply and GND.
© 2023, TIF Labs Pvt. Ltd.