Arduino Due

SKU
TIFC00004
In stock
Special Price Rs 1,857.32 Rs 1,574.00 was Rs 2,360.00
  • The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU.
  • It is the first Arduino board based on a 32-bit ARM core microcontroller.
  • 54 digital input/output pins (of which 12 can be used as PWM outputs)
  • 12 analog inputs
  • 4 UARTs (hardware serial ports
  • 84 MHz clock
  • USB OTG capable connection
  • 2 DAC (digital to analog)
  • 2 TWI
  • A Power jack, an SPI header, a JTAG header, a reset button, and an erase button.
  • -
    +
    Warning: Unlike most Arduino boards, the Arduino Due board runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the board.
    The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with a AC-to-DC adapter or battery to get started. The Due is compatible with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout.
    The Due follows the 1.0 pinout:
    • TWI: SDA and SCL pins that are near to the AREF pin.
    • IOREF: allows an attached shield with the proper configuration to adapt to the voltage provided by the board. This enables shield compatibility with a 3.3V board like the Due and AVR-based boards which operate at 5V.
    • An unconnected pin, reserved for future use.
    More Information
    Bestseller No
    Is Featured No
    rpi No
    HOT DEALS No
    Write Your Own Review
    You're reviewing:Arduino Due
    Your Rating
    We found other products you might like!

    Free Shipping

    On Orders Over Rs 1,500/-

    Accept payments online

    10 Day Refund Policy

    Safe Transactions

    Same Day Shipping

    0 / 5
    Contact Us
    Analog I/O Pins

    Input-12 /Output-2 (DAC)

    Clock Speed

    84 MHz

    Color

    Blue

    DC Current per I/O Pin

    130 mA, DC Current for 3.3V Pin: 800 mA, DC Current for 5V Pin: 800 mA

    Digital I/O Pins

    54 (of which 12 provide PWM output)

    Flash Memory

    512 KB all available for the user applications

    Input Voltage(Recommended)

    7-12V

    Microcontroller

    AT91SAM3X8E

    Operating Voltage

    3.3V

    SRAM

    96 KB (two banks: 64KB and 32KB)

    Weight (gm)

    35g

    Dimensions (mm) LxWxH

    104 x 53 x 15

    Shipment Weight

    0.125 kg

    Shipment Dimensions

    15 × 7 × 4 cm