Skip to product information
1 of 6

Robocraze

Advanced Digital Electronics Kit

Advanced Digital Electronics Kit

Out of stock

Regular price Rs. 759
Regular price Rs. 1,397 Sale price Rs. 759
Sale Sold out 46% off Best Price Guaranteed
You save Rs. 638
Incl. GST (No Hidden Charges)
Currently, people are actively checking out this product.
Submit your Bulk Enquiry Here

Contact form

  • The Advanced Digital Electronics Kit has been designed to give students and enthusiaists an advanced experience and understanding of the world of digital electronics.
  • This kit consists of logic gate ICs, LEDs, buttons and other ICs such as flip flops and shift registers to allow you to build various circuits and understand their working.
  • This will help you learn the higher level concepts of combinational circuits to build circuits such as BCD decoder drivers, serial to parallel data converters, binary counters, binary multipliers, etc.
  • Along with the components, an Advanced Digital Electronics Manual is also included to guide you through the concepts and the various experiments possible using the included components.

Advanced Digital Electronics Kit

Robocraze has curated the Advanced Digital Electronics Kit for those enthusiasts and students who are well versed with the concepts of boolean algebra and can understand the world of 0's and 1's. This advanced kit will dwell deeper into the domain of digital electronics with flip flops, shift registers, counters, 7 segments, multipliers, and more. Along with the kit, you will also get a Manual designed for Advanced Digital Electronics kit to guide you and challenge you with experiments.

Led[Light-emitting diode]: 

LED is an abbreviation for light-emitting diode. LED lighting products use up to 90% less energy than incandescent light bulbs. An electrical current flows through a microchip, illuminating the tiny light sources known as LEDs, resulting in visible light. 

Breadboard:

A breadboard (also known as a plug block) is used to create temporary circuits. It is beneficial to designers because it allows components to be easily removed and replaced. It is useful for someone who wants to build a circuit in order to demonstrate its operation and then reuse the components in another circuit.

Breadboard Power Supply:

The 3.3V/5V Breadboard Power Supply Module has a multi-purpose female USB socket as well as dual 5 V and 3.3 V power rails. The 3.3V/5V Breadboard Power Supply Module is designed to fit snugly into a standard 400 or 800 tie-point breadboard.

Multimeter:

A multimeter is a measuring device that can measure a variety of electrical properties. A typical multimeter can measure voltage, resistance, and current, and is also known as a volt-ohm-milliammeter (VOM) because it includes a voltmeter, an ammeter, and an ohmmeter.

Resistor:

A resistor is a component of an electronic circuit that limits or regulates the flow of electrical current. Resistors can also be used to supply a fixed voltage to an active device such as a transistor.

IC [Integrated Circuit]:

The IC [Integrated Circuit] is a small electronic device made of semiconductor material that contains many microscopic elements like diodes and transistors. Capacitors and resistors.

Jumper Wire:

A jumper wire is an electric wire used for connecting remote electric circuits on printed circuit boards. It is possible to short-circuit and short-cut (jump) to the electric circuit by connecting a jumper wire to the circuit.

7-segment display:
A seven-segment display is a type of electronic display device for displaying decimal numerals that is less complex than dot matrix displays.
Hi-Watt 9V Battery:
The most common and portable 9V battery is the Hi-Watt 9V Battery. It is non-rechargeable and provides a high-capacity, low-cost solution for a wide range of electronic devices. This battery provides a high-capacity and low-cost solution for a wide range of electronic devices. It is used in conjunction with its own battery snap. The battery clip can be used to power LEDs or other devices using a 9V battery. It's used in electronic toys, clocks, walkie-talkies, smoke alarms, hand-held test equipment, digital instruments, transistor radios, and other applications.

Micro Pushbutton:

The micro pushbutton is a small and inexpensive single pole single-through switch (SPST) that can be soldered on a printed circuit board (PCB). When pressed, this push button closes a circuit and is typically used as a reset button. 

Note: The package dimensions are 22x15cms and weigh about 50 grams.

Sample Experiment:-

Building a Binary Counter using J-K Flip Flop :-

Material Required:

  1. Breadboard Power Supply
  2. 9V Battery
  3. DC Barrel Jack
  4. Breadboard
  5. JK Flip flop - IC7476
  6. Jumper Wires

Procedure:

A binary counter can be constructed from J-K flip-flops by taking the output of one cell to the clock input of the next. The J and K inputs of each flip-flop are set to 1 to produce a toggle at each cycle of the clock input. For every two toggles of the first cell, a toggle is produced in the second cell, and so on down to the fourth cell. This produces a binary number equal to the number of cycles of the input clock signal. This device is sometimes called a "ripple through" counter. The same device is useful as a frequency divider.

In the 3-bit ripple counter, three flip-flops are used in the circuit. As here ‘n’ value is three, the counter can count up to 23 = 8 values .i.e. 000,001,010,011,100,101,110,111. The circuit diagram and timing diagram are given below.

 Circuit Diagram:

Advanced-Circuit Diagram

Timing Diagram:

Advanced - Timing Diagram

The output waveform of Q1 is given as a clock pulse to the flip flop J2K2. So, when Q1 goes from 1 to 0 transitions, the state of Q2 is changed. The output of Q2 is the MSB.

 

INPUT

OUTPUT

Number of Pulses

Q2

Q1

Q0

0

-

-

-

1

0

0

0

2

0

0

1

3

0

1

0

4

0

1

1

5

1

0

0

6

1

0

1

7

1

1

0

8

1

1

1

This circuit can be further connected to the BCD to 7-segment IC to get the BCD output onto the 7-segment display.

Applications:

  • The Advanced Digital Electronics kit can be used to build various combinational circuits such as BCD decoder drivers.
  • To build serial to parallel data converters.
  • To build binary counters.
  • To build binary multipliers.

Package Includes:

LED Red 6
LED Blue 6
LED Green 6
Bread Board - Full Size  1
Buzzer 1
7400 Quad 2 input NAND gates 2
7402 Quad 2 input NOR gates 2
7404 Hex NOT gates (Inverters) 2
7408 Quad 2 input AND gates 1
7420 IC – 4-input NAND gate 1
7432 Quad 2 input OR gates 1
7486 Quad 2 input XOR gates 1
74266 Quad 2 input XNOR gates 1
M2M Jumpers 1
9V Battery 1
7 segment display - Common Cathode 1
IC7447 - BCD to 7 segment 1
D flipflop - IC7474 2
JK Flip flop - IC7476 2
SN54/74LS95B shift register 2
Breadboard Power Supply 1
battery Snap with DC jack  1
Micro push button 8
750-ohm resistor 8
1K resistor 4
10K resistors 8
Multimeter (DT830D) 1
220 ohm resistor 20

Shipping & Returns

  • All orders confirmed before 3 pm IST are shipped on the
    same day, barring rare pickup delays on holidays or disturbances
  • Delivery time in Metro cities is 1-3 days, Others it is
    3-7 days. It varies based on location, reliant on courier services
  • Return window: 7 days from receipt unless stated
    otherwise. No refunds/replacements after
  • Returns only for non-working/damaged products are accepted
  • Initiate return requests to our customer service team via Support ticket or contact us at +91-8123057137
  • Refunds are processed within 3-4 working days post inspection and approval.

For more details, please check our Shipping and Return Policy

View full details

People Also Buy

Found a better price?

Let us know!
We'll try to match the price for you

  • ⚡ Dispatched within 24 hours

  • 💰 Earn RC Coins on every purchase

  • 🚚 Free shipping on orders above Rs 500/-

  • 🛠️ Dedicated Technical Support Team

1 of 4

1. WHAT ARE THE COMPONENTS OF AN Advanced Digital Electronics Kit?

  • This is an Advanced Digital Electronics Kit that includes all of the components needed for DIY electronics projects. The Advanced Digital Electronics Kit includes a plethora of logic gate ICs, as well as buttons and LEDs for providing input and visualizing the gates' outputs.

2. What is a Resistor?

  • A resistor is an electronic circuit component that limits or regulates the flow of electrical current. Resistors can also be used to provide a constant voltage to an active device like a transistor.

3. What is a Multimeter?

  • A multimeter is a device that can measure a wide range of electrical properties. A volt-ohm-milliammeter is a multimeter that can measure voltage, resistance, and current (VOM).

4. WHAT IS BREADBOARD POWER SUPPLY?

  • A Breadboard Power Supply Module accepts input from a battery, a 12V adapter, or any other source through a barrel jack and supplies 5V or 3.3V tension to our circuit, depending on our needs.

5. What is an LED?

  • A Light Emitting Diode (LED) is a semiconductor device, which can emit light when an electric current passes through it. Light is produced when p-type semiconductor holes recombine with n-type semiconductor electrons.